CD/DVD Servers & Loaders
ProServer Technical Specifications
Models
Model | Storage Capacity | Setup | CD Images* | DVD Images* |
ProServer 2000 XR | 160 GB | JBOD | 320 | 40 |
ProServer 2002 XR | 160 GB | RAID 1 | 320 | 40 |
320 GB | JBOD / RAID 0 | 640 | 80 | |
ProServer 3000 XR | 320 GB | JBOD | 640 | 80 |
ProServer 3002 XR | 320 GB | RAID 1 | 640 | 80 |
640 GB | JBOD / RAID 0 | 1,280 | 160 | |
ProServer 3500 XR | 500 GB | JBOD | 1,000 | 125 |
ProServer 3502 XR | 500 GB | RAID 1 | 1,000 | 125 |
1,000 GB | JBOD / RAID 0 | 1,500 | 250 | |
ProServer 3900 XR | 1,000 GB | JBOD | 1,500 | 250 |
ProServer 3902 XR | 1,000 GB | RAID 1 | 1,500 | 250 |
2,000 GB | JBOD / RAID 0 | 3,000 | 500 | |
ProServer 4000 XR | 2,000 GB | JBOD | 3,000 | 500 |
ProServer 4002 XR | 2,000 GB | RAID 1 | 3,000 | 500 |
4,000 GB | JBOD / RAID 0 | 4,000 | 1,000 | |
* Approximate Image Capacity |
Enclosures
Configuration | Dimensions (HxWxD) | Power Supply | Shipping Weight |
Desktop Mini-Tower | 10.5" x 7.5" x 18.0" | 350 Watts | 30 pounds |
4U Rack | 7.0" x 19.0" x 19.0" | 400 Watts | 50 to 80 pounds |
Drive Information
Hard Drives: | Up to 2 SATA hard drives - 4 TB total capacity |
Hard Drive Sizes: | 160gb, 250gb, 500gb, 1tb or 2tb SATA drives |
Optical Drives: | 3 to 8 DVD; 2 DVD-R/RW maximum Blu-Ray ROM or RW |
Detailed Technical Information and Specifications — At a Glance
Network Operating Systems: | Windows
95/98/ME/XP/NT/2000/2003/2007/Vista/7 UNIX/Linux |
Network Protocols: | TCP/IP
HTTP, CIFS/SMB, NFS v3, FTP BOOTP, RARP, DHCP, DNS; WINS; SMTP, SNMP; NTP; SSL |
Drive Performance Hard Drive Cache: | up to 48MB/sec with 8.5ms access |
CD-ROM Media: | up to 7,200KB/sec with 80ms access (48X) |
DVD-ROM Media: | up to 21,600KB/sec with 95ms access (16X) |
UPS | RS-232 (DB-9) serial port for attaching to APC SmartUPS or PPC UPS
to provide controlled shutdown in event of a power failure Network UPS support (RFC-1628) to monitor power status and power events |
RAID | Integrated Hardware RAID controller RAID 0 - disk striping RAID 1 - mirroring |
Environmental | Temperature: 40-105º F (5-40º C) Humidity: 20-80% RHG, non-condensing |
Dual Network Interface
The system features dual 10/100/1000Mbps Ethernet interfaces that can be configured in any of four methods:
Stand Alone: | Both adapters simultaneously receive and transmit data as a two logical channels. Ports can be connected to one or two different subnets. |
Fault Tolerance: | The second port automatically takes over on upon any failure of the primary connection (cable, adapter or port). If the connection to the primary adapter is restored, control passes automatically back to the primary adapter. |
Load Balancing: | If data flow increases to one network connection, traffic is automatically redistributed to ensure optimal network performance. |
Link Aggregation: | Both adapters simultaneously receive and transmit data as a single logical channel. Includes fault tolerance and load balancing. This feature requires a switch that supports Intel Link Aggregation, Cisco FEC, or IEEE 802.3ad (static-mode configuration only). |