CD/DVD Servers & Loaders

NetServ Technical Specifications



Models

Model No. Hard Drives Hard Drive Size Total Storage Storage Under RAID 5
NetServ 5000 XR/XL 4 160 gb 640 gb 480 gb
NetServ 6000 XR/XL 4 320 gb 1.28 tb 960 gb
NetServ 7000 XR/XL 4 500 gb 2.0 tb 1.5 tb
NetServ 7800 XR/XL 4 1 tb 4.0 tb 3.0 tb
NetServ 8300 XR/XL 8 320 gb 2.56 tb 2.24 tb
NetServ 8500 XR/XL 8 500 gb 4.0 tb 3.5 tb
NetServ 8900 XR/XL 8 1 tb 8.0 tb 6.0 tb
NetServ 8920 XR/XL 8 2 tb 16.0 tb 14.0 tb

Enclosures

NetServ XR

Configuration Dimensions (HxWxD) Power Supply 115/230v AC Shipping Weight
4 Drive Tower 17.5" x 7.5" x 18.0" Single 400W 35 to 45 pounds
4 Drive 4U Rack 7.0" x 19.0" x 19.0" Single 400W 50 to 80 pounds
8 Drive Tower 19.0" x 7.0" x 19.0" Single 400W Dual 330W 35 to 45 pounds
8 Drive 4U Rack 7.0" x 19.0" x 19.0" Single 400W Dual 330W 50 to 80 pounds

NetServ XL

Configuration Dimensions (HxWxD) Power Supply 115/230v AC Shipping Weight
4 Drive 1U Rack 1.75" x 17.5" x 28" Single 250W Dual 250W 45 to 55 pounds
8 Drive 2U Rack 3.5" x 17.5" x 28" Dual 350W 60 to 75 pounds

Drive Information

Hard Drives: Up to 8 SATA hard drives - 16 TB total capacity
Hard Drive Sizes: 160gb, 250gb, 500gb, 1tb or 2tb SATA drives
Optical Drives: 1 or 2 DVD ROM or DVD-R/RW
Blu-Ray ROM or RW

Detailed Technical Information and Specifications — At a Glance

Network Operating Systems: Windows 95/98/ME/XP/NT/2000/2003/2007/Vista/7
UNIX/Linux
Network Protocols: TCP/IP
ISCSI Target
HTTP, CIFS/SMB, NFS v3, FTP
BOOTP, RARP, DHCP, DNS; WINS; SMTP, SNMP; NTP; SSL
Drive Performance Hard Drive Cache: up to 48MB/sec with 8.5ms access
CD-ROM Media: up to 7,200KB/sec with 80ms access (48X)
DVD-ROM Media: up to 21,600KB/sec with 95ms access (16X)
UPS RS-232 (DB-9) serial port for attaching to APC SmartUPS or PPC UPS to provide controlled shutdown in event of a power failure
Network UPS support (RFC-1628) to monitor power status and power events
RAID Integrated Hardware RAID controller
RAID 0 - disk striping
RAID 1 - mirroring
RAID 5 - data & parity striping
RAID 6
RAID 10
Environmental Temperature: 40-105º F (5-40º C)
Humidity: 20-80% RHG, non-condensing

Dual Network Interface

The system features dual 10/100/1000Mbps Ethernet interfaces that can be configured in any of four methods:

Stand Alone: Both adapters simultaneously receive and transmit data as a two logical channels. Ports can be connected to one or two different subnets.
Fault Tolerance: The second port automatically takes over on upon any failure of the primary connection (cable, adapter or port). If the connection to the primary adapter is restored, control passes automatically back to the primary adapter.
Load Balancing: If data flow increases to one network connection, traffic is automatically redistributed to ensure optimal network performance.
Link Aggregation: Both adapters simultaneously receive and transmit data as a single logical channel. Includes fault tolerance and load balancing. This feature requires a switch that supports Intel Link Aggregation, Cisco FEC, or IEEE 802.3ad (static-mode configuration only).