CD/DVD Servers & Loaders

ServStation Technical Specifications



Models

Model Storage Capacity Setup CD Images* DVD Images*
ServStation 2000 XR/XL 160 GB JBOD 320 40
ServStation 2002 XR/XL 160 GB RAID 1 320 40
  320 GB JBOD / RAID 0 640 80
ServStation 3000 XR/XL 320 GB JBOD 640 80
ServStation 3002 XR/XL 320 GB RAID 1 640 80
  640 GB JBOD / RAID 0 1,280 160
ServStation 3500 XR/XL 500 GB JBOD 1,000 125
ServStation 3502 XR/XL 500 GB RAID 1 1,000 125
  1,000 GB JBOD / RAID 0 2,000 250
ServStation 3900 XR/XL 1,000 GB JBOD 2,000 250
ServStation 3902 XR/XL 1,000 GB RAID 1 2,000 250
  2,000 GB JBOD / RAID 0 3,000 500
ServStation 4000 XR/XL 2,000 GB JBOD 3,000 500
ServStation 4002 XR/XL 2,000 GB RAID 1 3,000 500
  4,000 GB JBOD / RAID 0 4,000 1,000
* Approximate Image Capacity

Enclosures

Configuration Dimensions (HxWxD) Power Supply Shipping Weight
Desktop Mini-Tower 10.5" x 7.5" x 18.0" 350 Watts 30 pounds
4U Rack 7.0" x 19.0" x 19.0" 400 Watts 50 to 80 pounds

Drive Information

Hard Drives: Up to 2 SATA hard drives - 4 TB total capacity
Hard Drive Sizes: 160gb, 250gb, 500gb, 1tb or 2tb SATA drives
Optical Drives: 1 or 2 DVD ROM or DVD-R/RW
Blue-Ray ROM or RW

Detailed Technical Information and Specifications — At a Glance

Network Operating Systems: Windows 95/98/ME/XP/NT/2000/2003/2007/Vista/7
UNIX/Linux
Network Protocols: TCP/IP
iSCSI Target
HTTP, CIFS/SMB, NFS v3, FTP
BOOTP, RARP, DHCP, DNS; WINS; SMTP, SNMP; NTP; SSL
Drive Performance Hard Drive Cache: up to 48MB/sec with 8.5ms access
CD-ROM Media: up to 7,200KB/sec with 80ms access (48X)
DVD-ROM Media: up to 21,600KB/sec with 95ms access (16X)
UPS RS-232 (DB-9) serial port for attaching to APC SmartUPS or PPC UPS to provide controlled shutdown in event of a power failure
Network UPS support (RFC-1628) to monitor power status and power events
RAID Integrated Hardware RAID controller
RAID 0 - disk striping
RAID 1 - mirroring
Environmental Temperature: 40-105º F (5-40º C)
Humidity: 20-80% RHG, non-condensing

Dual Network Interface

The system features dual 10/100/1000Mbps Ethernet interfaces that can be configured in any of four methods:

Stand Alone: Both adapters simultaneously receive and transmit data as a two logical channels. Ports can be connected to one or two different subnets.
Fault Tolerance: The second port automatically takes over on upon any failure of the primary connection (cable, adapter or port). If the connection to the primary adapter is restored, control passes automatically back to the primary adapter.
Load Balancing: If data flow increases to one network connection, traffic is automatically redistributed to ensure optimal network performance.
Link Aggregation: Both adapters simultaneously receive and transmit data as a single logical channel. Includes fault tolerance and load balancing. This feature requires a switch that supports Intel Link Aggregation, Cisco FEC, or IEEE 802.3ad (static-mode configuration only).